The test lab finally operational

//The test lab finally operational
  • Essai du capteur connecté sur cuve à fioul

The test lab finally operational

Now that we are installed in the fablab, we have brought back two tanks and a pool pump in order to carry out our tests. We started by filling one of the water tanks and then transferring the water from one tank to another through the pump, directly into our new laboratory.

It was not easy, our tanks that already have a heavy past, we have seen all the colors. Because of their old and damaged tip, we “flooded” the water laboratory …

After this small leak very quickly quenched, we finally successfully succeeded in connecting our probe.

Essai du capteur connecté sur cuve à fioul
Reception des données du test sur la cuve à fioul

Our level sensor works perfectly regardless of the tank and whatever its contents (water, wine, oil / fuel oil)

By varying the water level in our tank thanks to the pump we have captured the evolution and collected all the data on the dashboard.

Our first test is thus a success, the sensor emits all the necessary data which we then recovered on our servers.

We will keep you informed about the next tests and we wish you a great day. 🙂

2017-12-14T01:26:57+00:00 06/06/2017|Lab news'|
Votre panier