The fuel level sensor
Extra long battery
Up to 5 years of battery life
The sensor tells you when it sends data
Multi-pitch screw-thread, adaptable to all tanks
33 screw threads ( 1 1/4 inch, 1 1/2 inch & 2 inch)
Weather resistant (rain, cold…)
Sensitive to touch
Equipped with an accelerometer
All types of tanks
Fits all types of tanks / materials (plastic, steel, etc.) / positioning (underground, etc.)
5 YEARS OF BATTERY LIFE
- 2 modifiable batteries 1.5V AAA LR03
- Average observed
- Lora / Sigfox
- 1 statement / day
- Ultrasonic measurement
- Minimum distance: 35 cm
- Max distance: 3 meters
- Accuracy of measurements: 2%.
SERVICES & SOFTWARE
- SaaS & API Dashboard
- Visualization of the tanks on a map
- Matrix data management
- Alert management according to criticality / urgency
- Optimization of delivery flows
- Accounting with ERP (API)
- Data available for dashboard creation
- Installation assistance application
- Web interface access code
In 98% of cases, yes. The sensor will simply replace the cap of your tank and have the same thread pitch as the cap. The Fuel it sensor with its 3 different screw threads (1.25 inch, 1.5 inch & 2 inch) will fit easily into the filling opening of your tank.
Absolutely not. It is as easy to install the sensor as it is to aim a cap at a bottle!
The Fuel it sensor currently has the RCZ1 Sigfox chip. This chip allows the sensor to operate in:
Europe (subject to certain countries)
Not to mention:
The West Indies
For more details about the Sigfox network, please visit https://www.sigfox.com/en/coverage.
The Fuel it sensor batteries have a life span of approximately 5 years.
Above your sensor you will find an activation code, specific to each sensor, that you will have to enter on the Fuel it dashboard.
Height: 120 mm
Diameter: 60 mm
Screw thread : outer diameters (from smallest to largest): 1 1/4 inch, 1 1/2 inch, 2 inch
Approach the magnet (supplied with the packaging) from the top of the Fuel it sensor. A blue light should appear, the sensor is on.
Operating temperature range -10°C to +50°C.
Operating humidity 0 – 95% non-condensing
The Fuel it sensor can operate with a tank up to a maximum capacity of 20m3 (20 000 liters).
You will have no problem changing the batteries in the sensor. Batteries are common (1.5V AAA battery) you will find them in all supermarkets!
The data retrieved by the sensor will be available on the Fuel it dashboard or on the mobile application.
For professionals, a REST API has been set up, for the recovery of consolidated data from our server.
Currently we have industrialized our first series with Sigfox. We will have sensors working with LoRa in our next industrial series.
The sensor will operate under the conditions of the presence of the Sigfox network.
However, if your tank is preceded by an iron trapdoor, it will act as a Faraday cage, and the sensor signal will no longer pass through.
For the moment no, but we are working on it!
The subscription to your dashboard is paid for on each anniversary date. The subscription is 2€/month or 24€ for one year. When it expires, a message will alert you on your dashboard, so you can choose to continue or stop your subscription.